
Crochet Mini Bouquet Ring Holder 💐💍 | Beginner Friendly Step by Step Tutorial
If you’ve been looking for a crochet project that’s equal parts functional and adorable, you’ve just found your new favorite make. This crochet mini bouquet ring holder combines two things that feel like they were always meant to go together: the delicate art of crocheting tiny flowers and the practical need for a cute place to keep your rings safe. Whether you’re a beginner who just learned how to hold a hook or someone with a few projects under your belt, this tutorial walks you through every single step with zero assumptions about what you already know.
By the end of this post, you’ll have a sweet little floral ring holder that sits beautifully on your nightstand, vanity, or bathroom shelf — and one that genuinely looks like it came from a boutique shop. Let’s get into it.
Why This Project is Perfect for Beginners
Before we dive into materials and stitches, let’s talk about why this particular project is so beginner-friendly. A lot of crochet tutorials claim to be “easy” and then hit you with five different stitch types in the first ten rows. This one is different.
The mini bouquet ring holder is built almost entirely on just a few basic stitches: the magic ring, single crochet, slip stitch, and chain stitch. That’s it. If you’ve done even one previous crochet project, you likely already know these. If you’re brand new, these are the four foundational stitches you’ll use in almost every crochet project you ever make, so learning them here gives you skills that go far beyond this one adorable little holder.
The project is also small, which means it works up quickly. You can realistically complete your ring holder in one or two evenings, making it incredibly satisfying for beginners who sometimes struggle with the patience required for larger projects. There’s nothing better for motivation than finishing something beautiful fast.
And beyond skill level, this project is genuinely useful. You’re not just making something decorative that will sit in a box. You’re creating a functional accessory that solves a real everyday problem — keeping your rings off the bathroom counter and in one safe, visible spot.
Materials You’ll Need
One of the other things that makes this project so approachable is the short and affordable materials list. Here’s everything you need before you start:
Yarn: Cotton yarn works best for this project because it holds its shape well and doesn’t stretch out over time the way acrylic can. Any worsted weight or DK weight cotton yarn will do beautifully. You’ll want a small amount in at least two or three colors — a green for the stem/base, and one or two colors for your flower petals. Think classic pink and white, or get bold with yellow, lavender, or coral.
Hook: A 3.5mm or 4mm crochet hook is ideal for this project. If you’re working with DK weight yarn, go with the 3.5mm. Worsted weight pairs well with 4mm.
Stitch marker: This is optional but genuinely helpful for beginners. A simple split-ring stitch marker helps you keep track of where your rounds begin and end.
Scissors: Any pair will do, though small embroidery scissors give you cleaner cuts when working with this scale of project.
Yarn needle: You’ll use this to weave in your ends and to assemble the flowers. A blunt tapestry needle is perfect.
Polyfill stuffing or cotton batting: Just a small pinch. You’ll use this to stuff the base of your ring holder so it holds its dome or cone shape and sits sturdily on a flat surface.
Wire (optional): A short piece of floral wire or craft wire can be used inside the stem piece to give it rigidity. This is completely optional — many makers skip it and are happy with the result — but if you want your little bouquet to look extra polished, the wire makes a noticeable difference.
That’s the full list. You may already have most of these items on hand if you’ve done any crocheting before.
Understanding the Stitches
Before we move into the actual pattern, let’s do a quick refresher on the stitches you’ll be using. If you already know these, feel free to skip ahead. If you’re new, read this section carefully — it’ll make the pattern itself much easier to follow.
Magic Ring (MR): Also called a magic circle, this is how you’ll begin most of your rounds in this project. It creates a tight center with no hole in the middle, which is exactly what you want for small floral pieces. To make a magic ring, wrap your yarn around your finger twice, insert your hook through the loop, pull up a loop, and chain the required number of stitches. You’ll work your first round into this ring, then pull the tail to close the center.
Chain Stitch (ch): The most basic crochet stitch. Insert hook into the loop on your hook, yarn over, and pull through. One chain made.
Slip Stitch (sl st): Used to join rounds and create petal shapes. Insert hook into the designated stitch, yarn over, and pull through both the stitch and the loop on your hook in one motion.
Single Crochet (sc): The workhorse of this project. Insert hook into the stitch, yarn over and pull up a loop (two loops on hook), yarn over again and pull through both loops. One single crochet made.
Half Double Crochet (hdc): You’ll use this occasionally for petal shaping. Yarn over first, then insert hook into stitch, yarn over and pull up a loop (three loops on hook), yarn over and pull through all three loops.
Double Crochet (dc): Used to create the taller parts of petals. Yarn over, insert hook into stitch, yarn over and pull up a loop (three loops on hook), yarn over and pull through two loops (two loops remain), yarn over and pull through the remaining two loops.
Once you’re comfortable with these six stitches, you have everything you need.
Pattern Abbreviations
Throughout the pattern, you’ll see these abbreviations:
MR = Magic Ring, ch = chain, sl st = slip stitch, sc = single crochet, hdc = half double crochet, dc = double crochet, st = stitch, rnd = round, rep = repeat, yo = yarn over
Step-by-Step Pattern Instructions
Part One: The Base
The base is a small, slightly stuffed dome that your ring can rest on. You’ll work this in the round in your main color (green works wonderfully for a botanical feel, but cream or terracotta are gorgeous too).
With your main base color, make a magic ring.
Rnd 1: Chain 1, work 6 sc into the magic ring. Pull the tail to close the ring. (6 stitches)
Rnd 2: Work 2 sc in each stitch around. (12 stitches)
Rnd 3: Sc 1, 2 sc in next st — repeat this around. (18 stitches)
Rnd 4: Sc 2, 2 sc in next st — repeat this around. (24 stitches)
Rnd 5: Work 1 sc in each stitch around without increasing. (24 stitches)
Rnd 6: Sc 2, sc2tog — repeat around. (18 stitches) [Note: sc2tog means single crochet two together, which is a simple decrease. Insert hook in next st and pull up loop, then insert hook in following st and pull up a second loop, yo and pull through all three loops on hook.]
At this point, add your small pinch of polyfill or cotton batting inside the dome. Don’t overstuff — you want a gentle dome shape, not a ball.
Rnd 7: Sc 1, sc2tog — repeat around. (12 stitches)
Rnd 8: Sc2tog around. (6 stitches)
Fasten off, leaving a long tail. Thread your yarn needle and weave through the remaining 6 stitches, pull tight to close. Weave in your end.
Your base should look like a small rounded puff or dome — wide enough to sit stably and tall enough to cradle a ring.
Part Two: The Stem
The stem is what connects your base to your bouquet of flowers. If you want to add wire, cut a piece roughly 3–4 inches long and fold the ends over so there are no sharp points.
With your green yarn, chain 15 (or adjust length based on your preference — a longer chain gives a taller bouquet look).
Row 1: Starting in the second chain from the hook, sl st in each chain across. Fasten off, leaving a long tail for sewing.
Roll the chain tightly into a small cylinder shape. If you’re using wire, tuck it inside as you roll. Use your yarn needle and tail to stitch the rolled cylinder together so it holds its shape. This is your stem.
Stitch the bottom of the stem securely to the top center of your base dome. Knot and weave in the ends thoroughly — you want this connection to be sturdy since the rings will rest around or on the stem.
Part Three: The Flowers (Make 3–5)
Here’s where the magic happens. You’ll make several small flowers in your chosen petal colors and attach them around the top of the stem to create the bouquet effect. Each flower works up in about five minutes once you get the hang of the pattern.
For each flower:
With your petal color, make a magic ring.
Rnd 1: Chain 1, work 5 sc into the magic ring. Pull tail to close. (5 stitches)
Now you’ll make the petals. Each petal is made directly into one of your 5 base stitches.
Petal: In the same stitch, work (sl st, ch 2, dc, ch 2, sl st). This creates one rounded petal. Move to the next stitch and repeat. Continue until you’ve made a petal in all 5 stitches. (5 petals total)
Fasten off, leaving a tail for sewing.
You can make some petals slightly larger for variety. For a larger petal version, work (sl st, ch 3, 2 dc, ch 3, sl st) in each stitch instead. Mixing small and large petals in your bouquet gives it a really natural, organic look.
For a bit of texture, you can also work into the back loops only for your petals in some flowers, which gives them a slightly cupped shape versus a flat one.
Make at least three flowers, ideally five. If you want a lush bouquet effect, seven small flowers is stunning.
Part Four: The Leaves (Make 2–3, Optional but Recommended)
Leaves add so much charm and make the whole piece look more intentional and finished.
With green yarn, chain 8.
Row 1: Starting in the second chain from hook — sl st, sc, hdc, dc, hdc, sc, sl st. Turn your work and work back along the opposite side of the foundation chain the same way — sl st, sc, hdc, dc, hdc, sc, sl st.
Fasten off, leaving a tail for sewing. The result is a small, pointed oval leaf shape. Make two or three of these.
Part Five: Assembly
This is the most satisfying part. Lay all your pieces out and take a moment to plan how you want to arrange your bouquet before you start sewing.
Start by attaching your leaves to the stem. Use your yarn needle and the tail ends to stitch them at different angles around the base of the stem, near where it meets the dome. Weave in all ends carefully on the underside.
Next, attach your flowers one by one to the very top of the stem. You can cluster them tightly so they overlap slightly — this creates a full, lush bouquet look. Alternatively, you can stagger them at very slightly different heights for a wilder, just-picked-from-the-garden aesthetic.
Use your yarn needle to stitch each flower through its center base to the stem top. Pull the stitches snug but not so tight that they distort the petal shape.
Once all your flowers are attached, do a final check of all your ends. Any loose tails should be woven in and trimmed close.
Customization Ideas
One of the most delightful things about this project is how much room there is to make it your own. A few ideas to spark your creativity:
Color themes: For a bridal or wedding feel, go with all-white flowers and a soft sage green stem and base. For a boho look, mix terracotta, dusty pink, and cream. A bold, modern palette of deep burgundy and hunter green looks incredibly sophisticated.
Size variations: Want a larger version that holds multiple rings? Simply add more increase rounds to your base (going through Rnd 6 without decreasing, making the diameter wider) and make it taller by adding more non-increase rounds before you begin decreasing. A wider base means more stability for a larger cluster of rings.
Add beads: Tiny seed beads threaded onto the center of each flower or at the tips of petals add a gorgeous sparkle. You can do this by threading them onto your yarn before you begin a flower, then positioning them as you work.
Gift wrapping: This project makes an absolutely beautiful handmade gift. Pop your finished ring holder in a small kraft paper box with a bit of tissue paper and a handwritten tag. It’s the kind of gift that people display rather than store away.
Seasonal versions: Swap the color palette seasonally. Blush and white for spring, sunflower yellow for summer, orange and rust for autumn, silver and white for winter.
Tips for Success
A few small things that make a big difference in how your finished piece looks and holds up:
Work your stitches snugly, especially on the base and stem. Loose stitches mean your ring holder won’t hold its shape as well over time. If you tend to crochet loosely, try going down one hook size.
When attaching flowers, make sure you’re going through the yarn itself and not just wrapping around it. A stitch that goes through creates a much stronger bond.
Block your flowers lightly before assembly if you want them to look extra professional. Mist them with water, shape them gently, and allow them to dry flat. Cotton yarn responds beautifully to wet blocking.
Keep your ring holder clean by giving it an occasional gentle hand wash in cool water with a drop of dish soap. Reshape while damp and let air dry.
Final Thoughts
There’s something quietly wonderful about making something small and beautiful with your own hands. This crochet mini bouquet ring holder is one of those projects that looks impressive but is genuinely accessible — a project where the gap between what you made and what you imagined is satisfyingly small.
Whether you’re crocheting one for yourself or making a batch as gifts for friends, each one you make will be slightly different, slightly more polished, and maybe just a little more infused with your own personal style. That’s the thing about handmade objects — they carry the intention of the person who made them.
So gather your yarn, grab your hook, and set aside an evening. You’ve got a beautiful little bouquet waiting to be made.
If you give this pattern a try, share your finished make! Leave a comment below describing your color choices — or any tweaks you made to the pattern. Seeing how different makers interpret the same project is one of the greatest joys of the crochet community.
Happy hooking! 💐💍