
Crochet Tung Blossoms – No Sew Free Pattern
There is something quietly magical about tung blossoms. If you have ever stood beneath a tung oil tree in spring, you know the feeling — white petals with deep pink or red veining, clusters of delicate five-petaled flowers drifting down like slow snow. They are one of those blooms that feel almost too intricate to recreate, which makes capturing them in yarn all the more satisfying. This free crochet pattern will walk you through making your own tung blossoms from start to finish, with absolutely no sewing required. Every petal, every join, every finishing detail is worked directly into the crochet so you can skip the needle and thread entirely.
Whether you are making a single statement bloom for a hair clip, a whole bouquet for a vase, or a garland to drape across a mantle, these flowers are endlessly versatile. They work up quickly once you get the hang of the construction, and they make lovely gifts, home décor accents, and brooch bases. The no-sew method keeps the process frustration-free, which means you can settle into a rhythm and simply enjoy the making.
What Makes Tung Blossoms Special
The tung tree, known botanically as Vernicia fordii, blooms in early spring before its leaves fully emerge, which gives the flowers a stark, clean beauty against bare branches. Each blossom has five petals arranged in a pinwheel shape, usually white or very pale pink with bold veining that radiates from the center. The petals are slightly cupped and have a soft, rounded shape rather than coming to a sharp point.
Recreating that cup and those gently rounded petal edges is the focus of this crochet pattern. Rather than working a flat petal and calling it done, the construction here uses a combination of slip stitches and single crochets along the petal edges to create that natural inward curve. The veining detail is achieved with surface slip stitches worked in a contrasting color after the main flower body is complete, giving you that signature pink-on-white look without complicated colorwork mid-row.
Materials You Will Need
You do not need anything fancy for these blossoms. They are a wonderful stash-buster project, and even small amounts of yarn will go a long way since each flower uses only a few yards of each color.
For yarn, you will want a fingering weight or sport weight yarn in white or cream for the petals, a deep rose or burgundy for the veining, and yellow or gold for the center. DK weight works beautifully too and produces a slightly larger bloom, which is lovely for statement pieces. Avoid anything too bulky for this project — the stitch definition matters, and heavier weights can make the petal shaping look muddy.
For hooks, a 2.5mm to 3.5mm hook pairs well with fingering to sport weight yarn. If you are using DK, a 3.5mm to 4mm hook works well. Use whatever gives you a fabric that holds its shape without being stiff or cardboard-like.
You will also want scissors and a yarn needle just for weaving in ends (the no-sew part means no joining seams, but you will still need to tuck in your yarn tails). Optional but helpful: a small amount of fabric stiffener or diluted craft glue if you want your finished blossoms to hold a specific shape, especially for display pieces.
Gauge and Sizing
Gauge is flexible for this project. A finished flower made with fingering weight yarn on a 2.5mm hook will measure approximately 2.5 to 3 inches across. The same pattern worked in DK weight on a 3.5mm hook produces a bloom of about 3.5 to 4 inches. Neither size is wrong — it simply depends on what you plan to use the flowers for.
If you are making flowers for a brooch or hair accessory, the smaller fingering weight version is elegant and delicate. For a vase arrangement or wreath, the DK weight version has more presence and photographs beautifully.
Abbreviations
This pattern uses standard US crochet abbreviations throughout.
ch means chain. sl st means slip stitch. sc means single crochet. hdc means half double crochet. dc means double crochet. tr means treble crochet. MR means magic ring. YO means yarn over. rep means repeat. st means stitch. sp means space.
Understanding the No-Sew Construction
The secret to making these flowers without any sewing is working each petal as an extension of the same continuous round rather than making individual petals and stitching them together afterward. The base of each petal is anchored into a foundation chain, and because you work all five petals in sequence before fastening off, the flower is structurally complete the moment you close the final round.
The veining is added as surface crochet — essentially, you lay your contrast yarn on top of the finished petal and work slip stitches through both layers, pulling the yarn up and through without cutting the foundation. This technique bonds the veining to the petal without any needle or knot, and it gives a slightly raised, textured line that catches the light beautifully.
The center button is worked separately but joined to the main flower body in the final round using a standing single crochet join rather than a slip stitch seam. If you have never tried a standing single crochet, it is one of those small techniques that makes a genuinely large difference in how polished your finished work looks.
The Pattern
Part One — The Flower Base
Begin with your petal color, which is white or cream for a traditional tung blossom.
Make a magic ring and ch 3. This counts as your first dc.
Work 4 more dc into the ring, then join with a sl st to the top of the ch 3. You now have 5 stitches arranged in a small circle — one for each petal. Pull the magic ring tail to close the center. Do not fasten off.
Part Two — Working the Petals (No-Sew Method)
You will now work all five petals in a single continuous pass. Each petal begins with a chain that forms the petal spine, is built up with increases, and then worked back down toward the base with decreases that create the cupped shape.
For each petal, insert your hook into the first dc of the base round and ch 10. This is your petal spine chain. Now work back along that chain as follows: sl st into the 2nd ch from hook, sc into the next 2 ch, hdc into the next 2 ch, dc into the next 2 ch, hdc into the next ch, sc into the last ch before you reach the base ring again. Then sl st into the base of the petal to close and anchor it.
Before moving to the next petal, work 1 sl st into the next dc of the base ring to advance your position. This is what allows you to move from petal to petal without cutting the yarn or sewing anything.
Repeat this process for all five petals, working each one off a different dc of the base round. After the fifth petal, you should end up back at approximately the same position you started. Join with a sl st to the base of the first petal, then fasten off and weave in both ends.
At this point you have a five-petaled flower with a small open center, and you have not sewn a single stitch.
Part Three — The Petal Edge (Optional but Recommended)
For a more polished look that also reinforces the cupped petal shape, work a simple edging around each petal. Join your yarn at the base of any petal and work sc evenly up one side of the petal to the tip, work 3 sc into the tip to turn the corner, then sc back down the other side to the base. Work a sl st at the petal base before moving to the next petal.
This edging firms up the petal outline and adds the slight inward curl that makes these flowers so realistic. If you want a more pronounced cup, use a slightly smaller hook for the edging round than you used for the main flower body.
Part Four — The Veining
This is where your deep rose or burgundy yarn comes in, and this step is what transforms a simple flower into something that genuinely looks like a tung blossom.
Thread your contrast yarn onto a yarn needle just long enough to get it started, then lay the yarn diagonally across the surface of one petal, running from the base toward the tip. Using your crochet hook, work surface slip stitches directly through the petal fabric, catching the contrast yarn and pulling loops through. Work three or four slip stitches along the central vein line, then fasten off and tuck the end into the petal base.
Repeat for each petal. Traditional tung blossoms have a central vein and two smaller side veins that branch off near the lower third of the petal. If you want to add side veins, simply start a second shorter line of surface slip stitches at the branching point and work three stitches outward at a slight diagonal.
The veining takes a little practice to get neat, but even imperfect veining adds beautiful character. No two real tung blossoms are identical either.
Part Five — The Center
Work the center in yellow or gold yarn.
Make a magic ring and ch 1. Work 6 sc into the ring, then pull the tail to close. Work a second round of 2 sc into each sc around — you will have 12 stitches. Work a third round of sc in the back loop only around all 12 stitches, then sl st to join. Fasten off, leaving a tail of about 8 inches.
To join the center to the flower without sewing, turn the center piece face down and position it over the open hole in the middle of the flower base. Using the long tail and your hook, insert the hook through the center of the base ring from front to back, draw the yarn tail through, then work a sl st to anchor it. Work additional sl sts around the edge of the center piece, catching both the center and the base ring together as you go. This binds the center to the flower body firmly without a single sewn stitch.
Fasten off and weave in all remaining ends.
Making a Stem (Optional)
If you want freestanding flowers for a vase or bouquet, a simple crochet stem is easy to add.
Using green yarn and a 2mm hook, make a sl knot and ch 50 or longer depending on your desired stem length. Work 1 sl st into the 2nd ch from hook and into every ch across. This produces a slim, slightly textured cord that curls naturally, just like a real plant stem.
To attach the stem without sewing, leave a long starting tail when you begin the chain, then use your hook to pull that tail up through the base of the flower center from underneath. Work a sl st to anchor it and weave in the end.
You can also make small leaves by working an oval shape in green: ch 8, sc in the 2nd ch from hook and across to the last ch, work 3 sc in the last ch to turn, then sc back along the opposite side of the chain, join, and fasten off. These leaves attach to the stem the same way — no sewing needed.
Finishing and Display Ideas
One of the pleasures of this pattern is how many ways you can use the finished flowers. A single bloom pinned to a lapel or clipped to a headband is a beautiful accessory that looks far more complex than it was to make. A group of three blossoms wired together with floral wire and placed in a small vase makes a charming year-round centerpiece that never wilts.
For a spring wreath, make fifteen to twenty blossoms in graduating sizes and hot glue or wire them onto a grapevine or foam base. The mix of small fingering-weight flowers and larger DK-weight blooms adds the kind of organic variation you see in real flower clusters.
Tung blossoms also make a stunning addition to crochet garlands. String finished flowers together on a length of natural twine, alternating with small crochet leaves, and drape across a bookshelf, window frame, or fireplace mantle.
If you are making flowers for a corsage or brooch, a light application of fabric stiffener to the finished piece helps it hold its shape against clothing. Brush it on lightly with a foam brush, shape the petals while damp, and let them dry over a rounded surface like a tennis ball or large wooden bead to preserve the cupped form.
Troubleshooting Tips
If your petals are curling more than you would like, try working the main flower body with a hook one size larger than usual, then switching down for the edging round. The looser foundation gives the petal more natural drape while the tighter edging controls the outline.
If your petal tips are splitting or looking ragged, check that your chain tension is consistent when you work the spine chain. Many crocheters tension their chains tighter than their regular stitches, which can make the petal tip pull and distort. Practice making your chains a little looser, or simply chain one extra and adjust your stitch count back accordingly.
If the surface veining is puckering the petal fabric, your surface slip stitches are too tight. Keep the yarn loose as you work across the petal and let the hook do the work. The veins should sit on the surface of the fabric, not compress it.
Final Thoughts
Crochet flowers are one of those quiet joys that never really go out of style. There is something deeply satisfying about translating a real bloom — with all its subtle curves and color — into something that lasts indefinitely, never drops a petal, and can be made in any color combination your imagination suggests. Tung blossoms in deep purple with gold veining. Tung blossoms in dusty pink with cream centers. A whole tree’s worth of white blossoms scattered across a dark green garland like the real thing in early spring.
The no-sew method here is not just a convenience, though it certainly is that. It also produces cleaner construction because every join is structural rather than applied. There are no seams to come loose over time, no thread tails buried in places that might unravel, no guessing whether your needle caught enough of the fabric to hold. The flower is as strong as the yarn itself.
If you make these tung blossoms, share your photos in crochet communities, tag your projects, and do not hesitate to experiment with the pattern. Change the petal count to four for a different flower altogether, work the spine chain shorter for a rounder petal, or try the whole thing in variegated yarn for a painterly effect. Patterns are starting points, and the best thing about free patterns is that they belong to you the moment you pick up your hook.
Happy crocheting, and may your blossoms always bloom beautifully.