Crochet Lily of the Valley Pattern | Delicate Bell Flower

Crochet Lily of the Valley Pattern | Delicate Bell Flowers

There is something quietly magical about lily of the valley. The tiny white bells draping from slender arching stems, the deep green paired leaves, the way a single sprig can fill a whole room with sweetness — it is one of those flowers that feels almost too perfect to be real. Which makes it, naturally, a perfect candidate for crochet. A crocheted lily of the valley never wilts, never fades, and can be worked up in an afternoon to live on a wreath, a hair clip, a wedding bouquet, or a simple vase arrangement for as long as you want it.

This post walks you through a complete crochet lily of the valley pattern, including the delicate bell flowers, the arching stem, and the broad signature leaves. Whether you are a beginner who has just mastered the basic stitches or an intermediate crocheter looking for a satisfying botanical project, you will find clear instructions here, along with tips for getting that authentic drooping bell shape that makes this flower so recognizable.


Materials You Will Need

Before you cast on your first stitch, gather everything together so the work flows smoothly.

Yarn: You will want a lightweight yarn for realistic-looking flowers. Size 10 crochet thread or a fingering-weight (size 1) yarn in white or cream for the bells, and a medium green in the same weight for the leaves and stem works beautifully. If you want a slightly more visible, easier-to-handle project — especially good for beginners — a DK-weight yarn in white and green is perfectly acceptable. The flowers will simply be a little chunkier, which gives them a charming hand-made quality rather than a botanical one.

Hook: Match your hook to your yarn. For size 10 thread, a 1.5mm or 1.75mm steel hook is ideal. For fingering weight, try a 2.25mm hook. For DK weight, a 3.5mm hook gives a nice drape without too many gaps.

Other supplies: Floral wire or pipe cleaners in green (22-gauge floral wire is ideal), floral tape in green, wire cutters, a yarn needle for weaving in ends, and a small amount of fiberfill or polyester stuffing if you want to give your bells a tiny bit of body.


Understanding the Flower’s Structure

Before you begin, it helps to look at a real lily of the valley or a good photograph. Each plant sends up one or two slender stems from between two large oval leaves. Along the upper half of each stem, tiny round buds and open bell-shaped flowers hang on individual short stalks called pedicels. The bells nod downward, which is what gives the whole flower its gentle, bowing posture.

In this crochet pattern, you will make the bells individually, attach them to short wire pedicels, then arrange those pedicels along a main floral wire stem wrapped in green floral tape. The leaves are worked separately in flat crochet and then attached at the base. It sounds like several steps, but each individual piece is small and quick, so the whole sprig comes together faster than you might expect.


The Bell Flowers

Each lily of the valley bell is a tiny cup shape worked in the round. You will want to make between seven and twelve bells per stem for a full, realistic sprig. Making more than you think you need is always a good idea — extras are easy to store and you can use them for embellishments on so many other projects.

Finished size: Approximately 1.5cm (about 5/8 inch) tall and 1cm (about 3/8 inch) wide at the opening, using size 10 thread and a 1.75mm hook.

Pattern for one bell:

Using white yarn, make a magic ring (also called a magic circle or adjustable ring).

Round 1: Chain 1, work 6 single crochet into the ring, pull the ring closed, slip stitch to join. (6 stitches)

Round 2: Chain 1, work 2 single crochet in each stitch around, slip stitch to join. (12 stitches)

Round 3: Chain 1, single crochet in each stitch around, slip stitch to join. (12 stitches)

Round 4: Chain 1, work 1 single crochet, then decrease (single crochet 2 together) around, alternating decrease and single crochet. Slip stitch to join. (8 stitches)

Round 5: Chain 3 (counts as first double crochet), work 1 double crochet in the same stitch, then 2 double crochet in each stitch around, slip stitch to join to the top of the starting chain. (16 stitches)

Round 6 (the flared edge/petals): Slip stitch into the first stitch of round 5. Chain 3, skip 1 stitch, slip stitch into the next stitch — repeat from to around the opening until you have worked 8 small picot loops. Fasten off, leaving a tail of about 6 inches for attaching to wire.

The shape you should see at this point is a rounded bottom (the closed top of the bell, which will face upward on the plant), a narrowed middle, and a slightly flared opening edged with small loops. If you hold it upside down, it should immediately look like a tiny bell.

A note on the magic ring: If you are not comfortable with a magic ring, you can chain 2 and work 6 single crochet into the second chain from the hook. The result is very slightly less tight at the tip but still looks lovely once assembled.


Stuffing and Stiffening Your Bells

This is an optional step, but it makes a meaningful difference to the finished look. For each bell, tuck a tiny pinch of fiberfill into the rounded top before attaching it to its wire. This gives the bell a slightly fuller, rounder silhouette.

If you want your finished sprig to hold its shape firmly — especially useful for bouquets, corsages, or anything that will be handled often — you can stiffen the flowers with a mixture of equal parts white craft glue and water. Dip each finished bell in the mixture, squeeze out the excess, reshape it gently around the tip of a pencil or the eraser end of a pen, and allow it to dry completely upside down (opening facing down). Once dry, the yarn stiffens enough to hold its bell shape without flopping.


Making the Stems: Attaching Bells to Wire

Cut a 3-inch length of floral wire for each bell’s pedicel. Thread the wire through the top of the bell (through the magic ring opening) using a bent wire tip or a yarn needle as a guide, leaving about half an inch poking through the top. Bend that short end down against the outside of the bell and wrap it in place with a small piece of floral tape. The longer end of the wire becomes the pedicel stalk.

To build the main stem, take a full 12-inch length of floral wire. Starting at the top, attach your first bell pedicel about 2 inches down from the tip, wrapping both wires together tightly with floral tape. Continue adding bells every 1/2 inch to 3/4 inch down the stem, alternating them very slightly from side to side so they hang outward in a natural arc. The upper two or three positions on the stem can hold tightly closed bud shapes (see the bud variation below) rather than open bells, since real lily of the valley has buds at the top and open flowers lower down.

Once all bells and buds are attached, continue wrapping the lower portion of the stem with floral tape down to the base. The result should be a gracefully curved wire stem with bells nodding along its upper half.


Bud Variation

The tiny teardrop-shaped buds at the top of a lily of the valley stem are even simpler to make than the open bells.

Pattern for one bud:

Using white yarn, make a magic ring.

Round 1: Chain 1, work 4 single crochet into the ring, pull ring closed, slip stitch to join. (4 stitches)

Round 2: Chain 1, work 2 single crochet in each stitch, slip stitch to join. (8 stitches)

Round 3: Chain 1, single crochet in each stitch, slip stitch to join. (8 stitches)

Round 4: Decrease around (single crochet 2 together) until closed. (4 stitches) Fasten off, leaving a 6-inch tail.

Stuff lightly if desired, then attach to a short wire pedicel the same way as the open bells. The bud will be a small oval, rounder and less flared than the open flower.


The Leaves

The broad, smooth, deeply veined leaves of lily of the valley are as important to the finished look as the flowers. Each plant typically has two leaves. They are oval with a pointed tip, smooth-edged, and a rich medium green.

Pattern for one leaf (worked in rows):

Using green yarn, chain 4.

Row 1: Single crochet in the second chain from hook, single crochet in the next chain, 3 single crochet in the last chain (this creates the rounded tip). Now work back along the other side of the foundation chain: single crochet in the next 2 chains, slip stitch in the first chain to close the tip. (8 stitches around)

Row 2: Chain 1, turn. Single crochet in the next 3 stitches, 3 single crochet in the center tip stitch, single crochet in the next 3 stitches, slip stitch in the last stitch.

Row 3: Chain 1, turn. Single crochet across to the center tip, 3 single crochet in the tip, single crochet across to the end, slip stitch to close.

Repeat Row 3 until the leaf reaches your desired length — approximately 10 to 14 rows total for a leaf proportionate to a standard-sized sprig. The finished leaf should be about 3 to 4 inches long.

Fasten off and weave in ends.

For a more structured leaf that will hold an upright position, insert a length of floral wire along the center spine of the leaf before finishing: lay the wire along the wrong side of the work and use a yarn needle and the yarn tail to whip-stitch it in place down the center. The wire allows you to curve the leaf naturally.


Assembling the Full Sprig

Now comes the satisfying part. Take your finished flower stem and position one large leaf on each side of the base of the stem, curving them outward and slightly upward the way they grow naturally. Wrap the leaf stems (wire ends) together with the main stem using floral tape, pulling firmly so everything is snug.

Bend the main stem into a gentle S-curve — slightly arching the flower-bearing upper portion so the bells hang forward and downward, and bending the lower stem slightly back so the whole sprig has that characteristic graceful lean. Adjust each bell individually by bending its pedicel wire slightly downward if needed.

If you are making multiple sprigs for a bouquet, vary the number of bells on each stem slightly (some with seven, some with ten or eleven) and vary the degree of S-curve so they look like individual plants rather than identical copies.


Finishing Touches and Display Ideas

A single crochet lily of the valley sprig is beautiful on its own in a small bud vase. A bundle of three or five sprigs tied with a satin ribbon makes an exquisite and lasting gift — think of it as a wedding favor, a Mother’s Day present, or a memento for someone who loves the flower’s symbolic meaning (which is traditionally happiness, good luck, and the return of spring).

For a bridal bouquet, combine a dozen or more sprigs, mixing in a few small white rosebuds crocheted in the same thread for a lush, all-white posy with wonderful texture. Wrap the wire bundle at the base tightly with white satin ribbon and secure with pearl-headed pins.

For hair accessories, wire a single small sprig to a comb or barrette finding. The delicate scale of size-10 thread flowers is especially perfect for this kind of use — they nestle into an updo beautifully and look astonishingly realistic.

For wreaths and home décor, the flowers can be glued directly onto a grapevine or foam wreath base with a low-temperature glue gun, mixed with other botanical crochet motifs like ferns, snowdrops, or small white daisy-style flowers.


Tips for Getting the Best Results

Working with fine crochet thread for the first time can be a little frustrating until your hands adjust. A few things that help: work under good, direct light so you can see your stitches clearly, take breaks if your eyes or hands get tired, and do not worry if your tension is slightly inconsistent at first. The small scale of each individual flower means that any variation from bell to bell reads as natural variation rather than error.

If you find the magic ring genuinely difficult at fine thread weight, practice it a few times with a thicker yarn before switching to thread. The technique is the same regardless of yarn weight; heavier yarn just makes it easier to feel what your fingers are doing.

Blocking is optional for these small botanical pieces, especially if you plan to use stiffener or wire, but if you want the leaves in particular to lie perfectly flat, a light spray blocking on a foam board with pins to hold the shape while drying works beautifully.

Finally, do not skip the floral tape. It is what makes the whole thing look finished and professional, covering all the raw wire ends and construction details so only the crochet shows.


A Few Words on the Pattern’s Versatility

One of the best things about this crochet lily of the valley pattern is how well it scales. The basic bell shape works at any yarn weight. In bulky yarn on a large hook it becomes a quirky ornament or a decorative element for a woodland-themed garland. In the finest thread with a 0.6mm hook and patience, it becomes something genuinely jewelry-like. The structure — a closed round top, a narrowed body, a flared opening — translates across scales without needing to change anything except your materials.

The bells also work well as stand-alone motifs stitched onto garments, bags, or home textile pieces. A scattering of small white bell motifs across the hem of a linen summer dress, or a row of them along the cuff of a baby cardigan, creates a beautiful botanical detail. Each bell takes only a few minutes to work, so even a generous scattering does not take long to accumulate.


Whether this is your first botanical crochet project or your fiftieth, lily of the valley rewards the time you put in with something genuinely lovely. The combination of the delicate white bells, the deep green leaves, and that characteristic gentle droop gives the finished piece a lightness and grace that is hard to achieve with more complex techniques. Work slowly, enjoy each small piece as you make it, and by the time you assemble your first sprig and bend those bells into their natural nodding position, you will almost certainly want to make another.

Categorized in:

Crochet Flower Patterns,

Last Update: November 7, 2026